Trunk Naming - AT&T SB67030 Administrator's Manual

Trunk Naming

You can name the system trunks for easier identification. For PSTN Gateways, all 4 lines can be named. For the T1 Gateway, there
is only one physical trunk, so only that one trunk can be named regardless of how many slots the T1 trunk supports.
Renaming Gateway trunks can be useful when reserving trunks. See
To name a trunk:
Figure 136. Trunk Naming
System Configuration
Synapse Administrator's Guide
"Trunk Reservation (Outgoing Calls)" on page
1. Log in as administrator. See
2. Click System Settings, then Trunk Naming in the
3. Select a Trunk to Change from the drop-down list.
4. Enter the New Trunk Name using up to 16
5. Click
140
on page 68.
Navigation Menu at left. The screen shown in
Figure 136 display.
All trunks are listed.
characters.
to save the entry or click
refresh the screen without saving the changes.
141.
"Log in as Administrator"
to