AT&T SB67030 Administrator's Manual page 185

To manually update a device to the latest software version: (Continued)
Figure 169. Upgrade Device Menu, Part 2
System Configuration
Synapse Administrator's Guide
Status Message
This message
changes as the
update process
proceeds.
185
4. Click .
If there is an update available on the Internet, the
message shown in Figure 169 appears. Click
. The specified device restarts.
OR
In the Update Software From File section of the
screen, enter a file name or click
a previously acquired upgrade file. Once selected,
click . The specified device restarts.
5. After the device restarts, check the software
version number at the device to confirm that the
upgrade was successful.
On the Deskset: MENU –> Deskset
Information –> P Firmware Ver.
On the Gateway or ATA: Main Menu –>
Device Information –> Software.
If the device is sluggish or unresponsive during
the upgrade process, refer to
device becomes sluggish or unresponsive
during or immediately after software upgrade."
on page 204.
As a device is updated, it restarts with the new
software version so it may disappear from the
device list if its software version is
incompatible with the device whose IP address
was used for logging into the WebUI.
to select
"A Synapse