List Tcp Connections; List Tftp Clients; List Udp Listeners; List Tunnel - 3Com OfficeConnect Remote 812 Cli User's Manual

B-22 A B: CLI C
PPENDIX OMMAND

list tcp connections

list tftp clients

list udp listeners

list tunnel

list users

list vc

login_required

password

PAUSED COMMANDS
D
ESCRIPTION
Displays information about all TCP connections. Connection status is defined in
RFC-793.
Local Address - IP address of the local host for this connection


Local Port - TCP port number used by the local connection


Remote Address - IP address of the remote host for this connection


Remote Port - TCP port number used by the remote connection


Status - status of the connection. E.g.: Listen


Displays IP addresses of all users who allowed to use the Trivial File Transfer
Protocol (TFTP) to connect to the system. You must have used add network service
to add TFTP support to the system and used add tftp client to authorize users to
connect.
Displays User Datagram Protocol (UDP) ports being used by the system. These
ports correspond to processes which are receiving UDP data (for example SNMP,
User Management, TFTP service). Local IP addresses and port numbers are listed
for each UDP port.
Lists (displays) the name and status of tunnels.
Lists all users, showing:
User Name - user designation you specified using add user


Login Service - The service used to login to the network (i.e. TELNET).


Status - link status: ACTIVE, INACTIVE or DISABLED


Lists all virtual channel profiles, showing:
Name - user designation you specified using add vc


Network Service - type of network service: RFC1483, PPP, PPPLLC


VPI - Virtual Path Identifier


VCI - Virtual Channel Identifier


Status - link status: ACTIVE, INACTIVE or DISABLED


Enables or disables CLI password protection.
The CLI password. It must consist of 1 to 8 alphanumeric (printable) characters,
inclusive.
More (or CR)
Quit
Continue printing
Cancel rest of output