B-22
A
B: CLI COMMAND DESCRIPTION
PPENDIX
list users
list vc
login_required
password
PAUSED COMMANDS
PING
ping
<ip_name_or_addr>
QUICKVC
Lists all users, showing:
User Name - user designation you specified using add user
Login Service - The service used to login to the network (i.e. TELNET).
Status - link status: ACTIVE, INACTIVE or DISABLED
Lists all virtual channel profiles, showing:
Name - user designation you specified using add vc
Network Service - type of network service: RFC1483, PPP, PPPLLC
VPI - Virtual Path Identifier
VCI - Virtual Channel Identifier
Status - link status: ACTIVE, INACTIVE or DISABLED
enables or disables CLI password protection.
The CLI password. It must consist of 1 to 8 alphanumeric (printable) characters,
inclusive.
More (or CR)
Quit
More (or CR)
output [output_filename]
count [count]
interval [interval]
timeout [timeout_value]
Sends an ICMP echo request to a remote IP host. A reply from the pinged address
indicates success.
Parameters
<ip_name_or_address>
output
count
interval
timeout
Runs the QuickVC Setup program to easily configure a virtual channel connection
(remote site profile). See Chapter 5 for a complete description of the QuickVC
Setup program.
Continue printing
Cancel rest of output
Continue printing
Description
IP address in dotted notation, or host name of remote system.
A file name to direct output to.
Number of ICMP echo requests to send.
Number of seconds to wait between sending each request.
Number of seconds to wait for an echo response to return.