Verifying Nortel Ip Phone Functionality; Displaying Registered Ip Phones; Upgrading Firmware - Nortel 1000 Installation And Commissioning Manual
Hide thumbs
Also See for 1000:
- Description, installation and operation manual (646 pages) ,
- Features and services fundamentals (616 pages) ,
- Fundamentals (492 pages)
Table of Contents
Advertisement
Page 436 of 466
Verifying Nortel IP Phone functionality
Displaying registered IP Phones
Upgrading firmware
NN43041-310
Standard 01.11
Installing and configuring Nortel IP Phones
You can now use the IP Phones. To test the telephones, make Nortel IP
Phone-to-Nortel IP Phone calls.
Follow Procedure 105 to display the IP Phones registered on a Signaling
Server or Voice Gateway Media Card.
Procedure 105
Displaying registered IP Phones in Element Manager
1
Log in to Element Manager.
2
Select System > IP Network > Maintenance and Reports from the
navigator.
3
Click the desired node to expand it.
4
Click GEN CMD for the desired Signaling Server or Media Card.
a.
Select Iset from the Group Drop Down List box.
b.
If prompted, select the range of sets to display.
c.
Click RUN.
The status of all IP Phones registered on this Signaling Server or Media Card
is displayed.
Refer to the IP Line: Description, Installation, and Operation
(NN43100-500), to check for the latest Nortel IP Phone firmware version and
how to upgrade to the latest Nortel IP Phone firmware.
October 2008
End of Procedure
Advertisement
Chapters
Table of Contents
