MSAP2000 AAMS User's Guide
24.2 Commands Summary
The following table lists commands that you can use with the MSAP2000 AAMS.
Commands
Table 58
COMMAND
sys
info
passwd
reboot
snmp
server
client
show
hostname
<hostname>
location
<location>
contact
<contact>
[show|sec|can cel]
show
getcommunity
<community>
setcommunity
<community>
trapcommunity
<community>
trustedhost
<ip>
trapdst
<ip> [<port>]
show
enable
<telnet|ftp|web
|icmp>
disable
<telnet|ftp|web
|icmp>
port
<telnet|ftp|web
> <port>
show
enable
<index>
141
DESCRIPTION
Displays general system information.
Sets the system name.
Sets location information.
Sets contact person information.
Sets the system's administrator
password.
Sets the reboot timer or displays the
timer and remaining time for reboot.
If a reboot has been scheduled, use
cancel
to prevent a reboot.
Displays SNMP settings.
Sets the SNMP
GetRequest community.
Sets the SNMP
SetRequest community.
Sets the SNMP Trap community.
Sets the SNMP trusted host. Set
0.0.0.0 to trust all hosts.
Sets the SNMP trap server and
listening port. Set 0.0.0.0 to not
send any SNMP traps.
Displays the device's service
status and port numbers.
Turns on a service.
Turns off a service.
Sets a port for a service.
Displays the device's secured client
settings.
Allows a secured client set to
manage the device.