ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 149

MSAP2000 AAMS User's Guide
Commands (continued)
Table 58
COMMAND
COMMAND
mac
disable <vid>
delete <vlanlist>
pvid <portlist>
<pvid>
priority <portlist>
<priority>
gvrp <portlist>
<enable|disable>
frametype <portlist>
<all|tag|untag>
cpu show
set <vid>
flush
agingtime
show
set
<sec|0:disabled
>
count
show
[portlist]
enable
<portlist>
disable
<portlist>
set <portlist>
<count>
filter show [portlist]
enable
<portlist>
disable
<portlist>
set <port>
<mac> [<mac>
<mac> ...]
149
DESCRIPTION
DESCRIPTION
Turns off a VLAN entry.
Removes a VLAN entry.
Sets the PVID (Port VLAN ID)
assigned to untagged frames or
priority frames (0 VID) received on this
port(s).
Sets a port's default IEEE 802.1p
priority.
Turns GVRP on or off for the specified
ports.
Sets the specified DSL port to accept
VLAN tagged or untagged Ethernet
frames (or both).
Displays the VLAN ID of the
management VLAN.
Sets the VLAN ID of the management
VLAN.
Clears learned MAC addresses from
the forwarding table.
Displays the MAC aging out time period.
Sets the MAC aging out time period.
Displays the system's current MAC
address count settings.
Turns on the MAC address count
filter for a port(s).
Turns off the MAC address count
filter for a port(s).
Sets the MAC address count filter
for a port(s).
Displays MAC filter settings.
Turns on the MAC filter for a port(s).
Turns off the MAC filter for a port(s).
Adds a MAC filter MAC entry.