Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
7.9 VC Setup Screen
Click Basic Setting and then xDSL Port Setup in the navigation panel and then the
VC Setup link to open the following screen.
Use this screen to view and configure a port's channel (PVC) settings.
Figure 30
The following table describes the fields in this screen.
Table 17
LABEL
xDSL Port Setup
Port
Super Channel
VPI
VCI
VC Setup
VC Setup
DESCRIPTION
Click xDSL Port Setup to go to the screen where you can configure DSL
port settings.
Use this drop-down list box to select a port for which you wish to view or
configure settings.
The MSAP2000 AAMS forwards frames belonging to VLAN groups that
are not assigned to specific channels to the super channel.
Enable the super channel option to have this channel forward frames
belonging to multiple VLAN groups (that are not assigned to other channels).
The super channel functions in the same way as the channel in a single
channel environment.
Type the Virtual Path Identifier for a channel on this port.
Type the Virtual Circuit Identifier for a channel on this port.
64
Advertisement
Table of Contents
