ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 150

MSAP2000 AAMS User's Guide
Commands (continued)
Table 58
COMMAND
pktfilter
dot1x
delete <port>
<mac> [<mac>
<mac> ...]
show [portlist]
<portlist>
set
[pppoe|ip|arp|n
etbios|dhcp|eap
ol|igmp|none]
pppoeonly <portlist>
show [portlist]
enable
disable
auth <profile|radius
>
port
enable
<portlist>
disable
<portlist>
control
<portlist>
<auto|auth|unau th>
reauth
<portlist>
<on|off>
period
<portlist>
<period>
radius
show
ip <ip>
150
DESCRIPTION
Removes a MAC filter MAC entry.
See Section 28.13 on page 242
how to configure packet filters.
Displays packet type filter settings.
Sets the packet type filter for a
specific port.
none
accepts all packets. This
pktfilter
command disables the
pppoeonly <portlist>
command.
Uses this command to allow only
PPPoE traffic. It drops any non- PPPoE
packets.
This command disables the
pktfilter set <portlist>
[pppoe|ip|arp|netbios|dhc
p|eapol|igmp|none]
command.
Displays IEEE 802.1X settings.
Turns on IEEE 802.1X.
Turns off IEEE 802.1X.
Sets IEEE 802.1X to use the local
profiles or an external RADIUS
server for authentication.
Turns on IEEE 802.1X for
specific ports.
Turns off IEEE 802.1X for
specific ports.
Sets the IEEE 802.1X port
authentication option for specific
ports.
Sets the IEEE 802.1X re-
authentication option for specific
ports.
Sets the IEEE 802.1X re-
authentication period for specific
ports.
Displays the external RADIUS server
settings.
Sets the external RADIUS server IP
address.
for