Mac Filter Enable Command; Mac Filter Disable Command - ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual

MSAP2000 AAMS User's Guide
The following example displays the MAC filtering status and the fixed source MAC
addresses on ADSL port 5.
Figure 126 MAC Filter Show Command Example
ras> switch mac filter show 5
status:V, only listed MACs can pass through this port.
status:-, every MAC can pass this port. port status
mac
---- ------ -----------------
5

27.11.2 MAC Filter Enable Command

Syntax:
switch mac filter enable <portlist>
where
<portlist>
This command turns on the MAC filtering feature on the specified ADSL port(s) or
on all
ADSL ports if no port is specified.
The following example turns on the MAC filtering feature on ADSL port 5.
Figure 127 MAC Filter Enable Command Example
ras> switch mac filter enable 5

27.11.3 MAC Filter Disable Command

Syntax:
switch mac filter disable <portlist>
V 00:00:00:00:00:29
00:00:00:00:00:2a
00:00:00:00:00:2b
00:00:00:00:00:2c
00:00:00:00:00:2d
00:00:00:00:00:2e
00:00:00:00:00:2f
00:00:00:00:00:30
00:00:00:00:00:31
00:00:00:00:00:32
= You can specify a single ADSL port <1>, all ADSL
ports <*> or a list of ADSL ports <1,3,5>. You can also
include a range of ports <1,5,6~10>.
211