Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
The following table describes the labels in this screen.
Table 38
LABEL
RADIUS/Local
Profile
Enable
AAMS. Port
Enable
Control
Reauthentication
Reauthentication
Period(s)
Apply
Cancel
Port Authentication: 802.1x
DESCRIPTION
Click this link to configure the RADIUS server or local profile settings.
Select this check box to turn on IEEE 802.1x authentication on the
This field displays a port number.
Select this checkbox to turn on IEEE 802.1x authentication on this port.
Select Auto to authenticate all subscribers before they can access the
network through this port.
Select Force Authorized to allow all connected users to access the network
through this port without authentication.
Select Force Unauthorized to deny all subscribers access to the network
through this port.
Specify if a subscriber has to periodically re-enter his or her username
and password to stay connected to the port.
Specify how often a client has to re-enter his or her username and password
to stay connected to the port.
Click Apply to save your changes to the MSAP2000 AAMS's volatile memory.
The MSAP2000 AAMS loses these changes if it is turned off or loses power, so
use the Config Save link on the navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
109
Advertisement
Table of Contents
