ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 68

MSAP2000 AAMS User's Guide
Figure 31
The following table describes the fields in this screen.
Table 18
LABEL
VC Profile
Alarm Profile
IGMP Filter Profile
Index
Name
Latency Mode
Down/Up Stream
Rate (kbps)
Modify
Delete
The rest of the screen is for profile configuration.
Name
Port Profile
Port Profile
DESCRIPTION
Click VC Profile to open the VC Profile screen where you can configure
virtual channel profiles.
Click Alarm Profile to open the Alarm Profile screen where you can
configure limits that trigger an alarm when exceeded.
Click IGMP Filter Profile to open the IGMP Filter Profile screen where you
can configure IGMP multicast filter profiles.
This is the port profile index number.
These are the names of individual profiles. The DEFVAL profile always exists and
all of the DSL ports have it assigned to them by default. You can use up to 31
ASCII characters; spaces are not allowed.
This is the ADSL latency mode (Fast or Interleave) for the ports that belong to
this profile.
These are the maximum downstream and upstream transfer rates for the ports
that belong to this profile.
Select a profile's Select radio button and click Modify to edit the profile.
Select a profile's Select radio button and click Delete to remove the profile.
When editing a profile, this is the name of this profile. When adding a profile,
type a name (up to 31 characters) for the profile.
68