Virtual Channel Profile Commands; Show Virtual Channel Profile Command; Set Virtual Channel Profile Command - ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual

MSAP2000 AAMS User's Guide
This command displays which alarm profiles the MSAP2000 AAMS is set to use for
specific (or all) ADSL
ports.
The following example displays which alarm profile the MSAP2000 AAMS is set to
use for ADSL port 5.
Figure 104
ras> adsl alarmprofile showmap 5
ADSL alarm profile mapping:
Port 5: Alarm Profile = DEFVAL

26.4 Virtual Channel Profile Commands

Use the following commands to configure virtual channel profiles.

26.4.1 Show Virtual Channel Profile Command

Syntax:
adsl vcprofile show [vcprofile]
where
[vcprofile]
Displays the settings of the specified virtual channel profile (or all of them if
you do not specify one).

26.4.2 Set Virtual Channel Profile Command

Syntax:
adsl vcprofile set <vcprofile> <vc|llc> <ubr|cbr> <pcr> <cdvt>
or
adsl vcprofile set <vcprofile> <vc|llc> <vbr(rt-vbr)|nrt-vbr> <pcr> <cdvt>
<scr> <bt>
Alarm Profile Showmap Command Example
= The name of the virtual channel profile (up to 31 ASCII
charac
ters).
185