Log Clear Command; Monitor Show Command; Monitor Vlimit Command - ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual

MSAP2000 AAMS User's Guide
Figure 87
ras> sys log show
1 Wed Aug 11 20:37:11 2004 telnetd
2 Wed Aug 11 20:37:05 2004 telnetd
3 Wed Aug 11 20:36:56 2004 telnetd

25.2.19 Log Clear Command

Syntax:
ras> sys log clear
This command clears the system error log.
Note: If you clear a log (using the

25.2.20 Monitor Show Command

Syntax:
ras> sys monitor show
This command displays the hardware monitor's statistics.
An example is shown next.
Figure 88
ras> sys monitor show
Hardware monitor status: enabled
1.344
1.656 v3(v)
v4(v)
t1(c)
t2(c)
t3(c)

25.2.21 Monitor Vlimit Command

Syntax:
ras> sys monitor vlimit <idx> <high> <low>
Log Show Command Example
Monitor Show Command Example
limit(hi) limit(lo)
--------- --------- v1(v)
1.056 v2(v) 1.944
3.564 3.036
19.440 16.560
97.0 -55.0
97.0 -55.0
97.0 -55.0
INFO Session Begin!
INFO Session Begin!
INFO Session Begin!
command), you cannot view it again.
log clear
165