Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
Commands (continued)
Table 58
COMMAND
COMMAND
time
date
timeserver
log
wdog
disable
<index>
set
<index> <start ip>
<end ip>[[telnet] [ftp]
[web] [icmp]]
syslog
show
enable
disable
server
<ip>
facility
<facility>
show
set
<hh> [<mm>
[ss]]
show
set
<yyyy mm dd>
show
set
<none>
<daytime|time|n tp>
<ip> <utc[<+|-
>0100~1200]>
[nosync]
sync
show
clear
show
142
Description
DESCRIPTION
Stops a secured client set
from managing the device.
Sets a secured client set: a range of
IP addresses from which you can
manage the device and the protocols
that can be used.
The syslog feature sends logs to an
external syslog server.
Displays the syslog settings.
Turns on the syslog logging.
Turns off the syslog logging.
Sets the IP address of the syslog
server.
Set the log facility (1~7) to log the
syslog messages to different files in
the syslog server. See your syslog
program's documentation for details.
Displays the system's current time.
Sets the system's time.
Displays the system's current date.
Sets the system's date.
Displays the system's time server.
Sets the system to not use a
time server.
Sets the time service protocol,
time server's IP address and the
device's time zone.
Retrieves the date and time from
the time server.
Displays the device's logs.
Clears the device's logs.
Displays the current watchdog
firmware protection feature status
and timer.
Advertisement
Table of Contents
