Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
where
<portlist>
ports
<vpi> <vci>
[clear]
This command displays and/or erases port statistics.
The following example displays port statistics for ADSL port 1.
Figure 141
ras> statistics port 1
[adsl port 1]
tx packets
rx packets
tx uni-packets
packets
packets : 19 rx nonuni-
packets : 0 tx discard
packets: 0 rx discard
packets: 0 errors
tx rate (bytes/s): 0 rx rate
(bytes/s): 128
tx bytes
rx bytes
where
tx uni-packets
rx uni-packets
tx nonuni-packets
rx nonuni-packets
See the web configurator sections on port statistics for details on the other port
statistics fields.
=
You can specify a single port <1>, all ports <*> or a list of
<1,3,enet1>. You can also include a range of ports
<1,5,6~10,enet1,e
net2>.
=
The VPI and VCI of an individual PVC.
Use
clear
specified port(s) or PVC's counters back to zero.
Statistics Port Command Example
: 20
: 0
: 1 rx uni-
: 0 tx nonuni-
: 0
: 5904
: 0
=
This field shows the number of unicast packets
transmitted on this port.
=
This field shows the number of unicast packets
received on this port.
=
This field shows the number of non-unicast
(broadcast and multicast) packets transmitted on
this port.
=
This field shows the number of non-unicast
(broadcast and multicast) packets received on
this port
to have the MSAP2000 AAMS set the
226
Advertisement
Table of Contents
