Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
Figure 21
The following table describes the labels in this screen.
Table 7
LABEL
Return
Port
Port Name
Rx bytes
Rx packets
Rx error fcs
Rx multicast
Rx broadcast
Ethernet Port Statistics
Ethernet Port Statistics
DESCRIPTION
Click this link to go back to the Home screen.
Use this drop-down list box to select a port for which you wish to view
statistics. This field identifies the port described in this screen.
This field displays the name that you have configured for the port.
This field shows the number of octets of Ethernet frames received that are from 0
to 1518 octets in size, counting the ones in bad packets, not counting framing bits
but counting FCS (Frame Check Sequence) octets. An octet is an 8-bit binary digit
(byte).
This field shows the number of packets received on this port (including
multicast, unicast, broadcast and bad packets).
This field shows the number of frames received with an integral length of 64 to
1518 octets and containing a Frame Check Sequence error.
This field shows the number of good multicast frames received of 64 to 1518 octets
in length (for non VLAN) or 1522 octets (for VLAN), not including Broadcast frames.
Frames with range or length errors are also not taken into account.
This field shows the number of good broadcast frames received of 64 to 1518
octets in length (for non VLAN) or 1522 octets (for VLAN), not including multicast
frames. Frames with range or length errors are also not taken into account.
43
Advertisement
Table of Contents
