ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 194

MSAP2000 AAMS User's Guide
Switch Commands (continued)
Table 61
COMMAND
enet
smcast
isolation
radius
show
ip <ip>
port <port>
secret <secret>
profile
show
set <name>
<password>
delete <name>
show
speed <portlist>
<10copper|100co
pper|auto>
name <portlist>
<name>
enable <portlist>
disable <portlist>
show
set <adsl_port>
<mac>
<join|leave>
delete <mac>
show
enable
disable
194
DESCRIPTION
Displays the external RADIUS server
settings.
Sets the external RADIUS server IP
address.
Sets the external RADIUS server
port number.
Sets the authentication and
encryption key.
Displays the local profiles.
Creates or edits a local profile.
Removes a local profile.
Displays the Ethernet port settings.
Sets the Ethernet port(s)
connection speed.
Sets the Ethernet port(s) name.
Turns on the specified Ethernet
port(s).
Turns off the specified Ethernet
port(s).
Use the static multicast filter to pass
routing protocols, such as RIP and
OSPF.
Display all MAC addresses joined to
ADSL ports.
Use join/leave to add/ remove
multicast MAC addresses (up to ten)
on specified ADSL ports, a range of
ADSL ports or all ADSL ports. MAC
example: 01005E010203
Removes a static multicast filter
entry by deleting the associated
MAC address.
Displays the subscriber isolation
feature's current setting.
Turns the subscriber isolation
feature on.
Turns the subscriber isolation
feature off.