Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
Figure 33
The following table describes the fields in this screen.
Table 19
LABEL
Port Profile
Alarm Profile
IGMP Filter Profile Click IGMP Filter Profile to open the IGMP Filter Profile screen where you
Index
Name
Encap
AAL
Class
PCR
CDVT
SCR
BT
Modify
Delete
The rest of the screen is for PVC configuration.
VC Profile
VC Profile
DESCRIPTION
Click Port Profile to configure port profiles and assign them to individual ports.
Click Alarm Profile to open the Alarm Profile screen where you can configure
limits that trigger an alarm when exceeded.
can configure IGMP multicast filter profiles.
This is the number of the VC profile.
This name identifies the VC profile.
This field displays the profile's type of encapsulation (llc or vc).
The MSAP2000 AAMS ADSL ports' PVCs use ATM Adaptation Layer (AAL) 5.
This field displays the type of ATM traffic class: cbr (constant bit rate), vbr (real-
time variable bit rate), nrt-vbr (non-real time variable bit rate) or ubr (unspecified
bit rate).
This is the Peak Cell Rate (PCR), the maximum rate at which the sender can send
cells.
This field displays the accepted tolerance of the difference between a
cell's transfer delay and the expected transfer delay.
The Sustained Cell Rate (SCR) sets the average cell rate (long-term) that can
be transmitted. SCR applies with the vbr traffic class.
Minimum Cell Rate (MCR) is the minimum rate at which the sender can send cells.
Burst Tolerance (BT) is the maximum number of cells that the port is guaranteed to
handle without any discards. BT applies with the vbr traffic class.
Select a VC profile's Select radio button and click Modify to edit the VC profile.
Select a VC profile's Select radio button and click Delete to remove the VC profile.
73
Advertisement
Table of Contents
