ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 176

MSAP2000 AAMS User's Guide
<down max rate>
(64-
<up target margin>
<up min margin>
margin
<up max margin>
margin
<up min rate>
<down target
margin>
<down min
margin>
<down max
margin>
<down min rate>
The profile is a table that contains information on ADSL line configuration. Each
entry in this table reflects a parameter defined by a manager, which can be used
to configure the ADSL line.
Note that the default value will be used for any of the above fields that are omitted.
The upstream rate must be less than or equal to the downstream rate.
Even though you can specify arbitrary numbers in the profile set command, the
actual rate is always a multiple of 32 Kbps. If you enter a rate that is not a
multiple of 32 Kbps, the actual rate will be the next lower multiple of 32Kbps. For
instance, if you specify 66 Kbps, the actual rate will not be over 64Kbps.
The following example creates a premium profile (named gold) for providing
subscribers with very high connection speeds and no interleave delay. It also sets
the upstream target signal/ noise margin to 5 db, the upstream minimum
acceptable signal/noise margin to 0 db, the upstream maximum acceptable
signal/noise margin to 30 db, the upstream minimum ADSL transmission rate to
64 Kbps, the downstream target signal/noise margin to 5 db, the downstream
minimum acceptable signal/noise margin to 0 db, the downstream maximum
acceptable signal/noise margin to 30 db and the downstream minimum ADSL
transmission rate to 128 Kbps.
ras> adsl profile set gold fast 800 8000 5 0 30 64 5 0 30 128
This next example creates a similar premium profile (named goldi), except it sets
an interleave delay of 16 ms for both upstream and downstream traffic.
=
The maximum ADSL downstream transmission rate
32000 Kbps).
=
The target ADSL upstream signal/noise margin (0-31db).
= The minimum acceptable ADSL upstream signal/noise
(0-31db).
= The maximum acceptable ADSL upstream signal/noise
(0-31db).
= The minimum ADSL upstream transmission rate (64-
4096 Kbps).
= The target ADSL downstream signal/noise margin (0-31db).
= The minimum acceptable ADSL downstream
signal/noise margin (0-31db).
= The maximum acceptable ADSL downstream
signal/noise margin (0-31db).
= The minimum ADSL downstream transmission rate (64-
32000 Kbps).
176