MSAP2000 AAMS User's Guide
7 Type
8 Wait for the
upload on your terminal.
9 This is an example Xmodem configuration upload using HyperTerminal. Click
Transfer, then Send File to display the following screen.
Figure 153
10After a successful firmware upload, type
AAMS. The console port speed automatically changes back to 9600 bps
when the MSAP2000 AAMS restarts.
after the
atur
Enter Debug Mode
Starting XMODEM upload
Example Xmodem Upload
message.
message before activating XMODEM
Type the firmware file's
location, or click
Browse to search for it.
Choose the 1K Xmodem
protocol.
Then click Send.
to restart the MSAP2000
atgo
248