Adsl Command Examples; Adsl Show Command - ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual

MSAP2000 AAMS User's Guide
ADSL Commands (continued)
Table 60
COMMAND
sra
pmm

26.3 ADSL Command Examples

These are the commonly used commands that belong to the ADSL group of
commands.

26.3.1 ADSL Show Command

Syntax:
adsl show [portlist]
where
[portlist]
This command shows the activation status, ADSL mode, maximum upstream and
downstream rate settings, profile and name of each ADSL port.
The following example displays information on ADSL port 5.
disable <portlist>
show <portlist>
enable <portlist>
disable <portlist>
show <portlist>
enable <portlist>
disable <portlist>
show <portlist>
= You can specify a single ADSL port <1>, all ADSL
ports <*> or a list of ADSL ports <1,3,5>. You can also
include a range of ports <1,5,6~10>.
173
DESCRIPTION
Turns off the Annex L feature on
the specified port(s).
Displays the Annex L feature
setting for the specified port(s).
Turns on Seamless Rate Adaptation
(SRA) ADSL2+ on the specified
port(s).
Turns off SRA ADSL2+ on the
specified port(s).
Displays the SRA ADSL2+
setting for the specified port(s).
Turns on the Power ManageMent
feature on the specified port(s).
Turns off the Power ManageMent
feature on the specified port(s).
Displays the Power ManageMent
feature setting for the specified port(s).