MSAP2000 AAMS User's Guide
28.4 General IP Commands
The following shows general IP commands that help with the management of the
IP
parameters.
28.4.1 Show Command
Syntax:
ras> ip show
Use the command to display the current management IP settings.
28.4.2 Ping Command
Syntax:
ras> ip ping <ip> [count]
where
<ip>
[count]
This is an IP facility to check for network functionality by sending an echo request
to another
IP host and waiting for the reply.
28.4.3 Route Set Command
Syntax:
ras> ip route set <dst ip>[/netmask] <gateway ip> [metric] <name>
=
The IP address of the target.
=
The number of pings you want the MSAP2000 AAMS to send
221