ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 172

MSAP2000 AAMS User's Guide
ADSL Commands (continued)
Table 60
COMMAND
alarmprofi le
annexl
setld <port number>
getld <port number>
show [profile]
set <profile>
[<atuc lofs>
<atur lofs>
<atuc loss>
<atur loss>
<atuc lols>
<atuc lprs>
<atur lprs>
<atuc ess>
<atur ess>
<atuc fast rateup>
<atur fast rateup>
<atuc interleave
rateup> <atur
interleave rateup>
<atuc fast ratedown>
<atur fast ratedown>
<atuc interleave
ratedown> <atur
interleave ratedown>
<init fail enable>
<atuc ses>
<atur ses>
<atuc uas>
<atur uas>]
delete <profile>
map <portlist>
<profile>
showmap [port number]
showport [port]
enable <portlist>
172
DESCRIPTION
Sets the specified port to
line diagnostic mode.
Displays the specified port
line diagnostics.
See Section 27.3.13 on page 208
for how to configure alarm profiles.
Displays alarm profiles and
Configures an alarm profile.
Removes an alarm profile.
Maps specified ADSL ports to an
alarm profile.
Displays alarm profile to ADSL port
mapping.
Displays which alarm profile
parameters are mapped to an ADSL
port.
Turns on the Annex L feature on the
specified port(s).