ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 151

MSAP2000 AAMS User's Guide
Commands (continued)
Table 58
COMMAND
enet
smcast
isolation
showall
ip
port <port>
secret <secret>
profile
show
set <name>
<password>
delete <name>
show
speed <portlist>
<10copper|100co
pper|auto>
name <portlist>
<name>
enable <portlist>
disable <portlist>
show
set <adsl_port>
<mac>
<join|leave>
delete <mac>
show
enable
disable
daisychain
standalone
[nopause]
151
DESCRIPTION
Sets the external RADIUS server
port number.
Sets the authentication and encryption
key.
Displays the local profiles.
Creates or edits a local profile.
Removes a local profile.
Displays the Ethernet port settings.
Sets the Ethernet port(s) connection
speed.
Sets the Ethernet port(s) name.
Turns on the specified Ethernet
port(s).
Turns off the specified
Ethernet port(s).
Use the static multicast filter to
pass routing protocols, such as
RIP and OSPF.
Display all MAC addresses joined to
ADSL ports.
Use join/leave to add/ remove
multicast MAC addresses (up to ten)
on specified ADSL ports, a range of
ADSL ports or all ADSL ports. MAC
example: 01005E010203
Removes a static multicast filter entry
by deleting the associated MAC
address.
Displays the subscriber isolation
feature's current setting.
Turns the subscriber isolation feature
on.
Turns the subscriber isolation feature
off.
Sets the device to daisychain mode.
Sets the device to standalone mode.
Displays all of the MSAP2000 AAMS's
switch configuration.