Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
This chapter describes how to configure the System Information, General
Setup, Switch Setup, IP Setup and ENET Port Setup screens.
6.1 Basic Setting Screens Overview
The System Information screen displays general MSAP2000 AAMS
information (such as firmware version number) and hardware polling
information (such as fan status).
The General Setup screen allows you to configure general MSAP2000 AAMS
identification information. It also allows you to set the system time manually or get
the current time and date from an external server when you turn on your
MSAP2000 AAMS. The real time is then displayed in the MSAP2000 AAMS logs.
The Switch Setup screen allows you to set up and configure global switch
features.
The IP Setup screen allows you to configure a MSAP2000 AAMS IP address,
subnet mask and DNS
(domain name server) for management purposes.
The ENET Port Setup screen allows you to configure settings for the Ethernet
ports.
See
Chapter 8 on page 83
the ADSL
ports.
6.2 System Information
In the navigation panel, click Basic Setting and then System Information to
display the screen as shown. You can check the firmware version number and
monitor the hardware status in this screen.
B
asic Setting Screens
for how to use the xDSL Port Setup screens to configure
48
C
H A P T E R
6
Advertisement
Table of Contents
