ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 155

MSAP2000 AAMS User's Guide
Sys Commands (continued)
Table 59
COMMAND
client
syslog
time
date
timeserver
enable <telnet|ftp|web
|icmp>
disable <telnet|ftp|web
|icmp>
port <telnet|ftp|web
> <port>
show
enable <index>
disable <index>
set <index> <start ip>
<end ip>
[[telnet] [ftp]
[web] [icmp]]
show
<ip>
facility <facility>
show
set <hh> [<mm>
[ss]]
show
set <yyyy mm dd>
show
set <none>
<daytime|time|n tp>
<ip> <utc[<+|-
>0100~1200]>
[nosync]
155
DESCRIPTION
Turns on a service.
Turns off a service.
Sets a port for a service.
Displays the device's secured
client settings.
Allows a secured client set to
manage the device.
Stops a secured client set from
managing the device.
Sets a secured client set: a range of
IP addresses from which you can
manage the device and the
protocols that can be used.
The syslog feature sends logs
to an external syslog server.
Displays the syslog settings.
Turns on the syslog logging.
Turns off the syslog logging.
Sets the IP address of the syslog
server.
Set the log facility (1~7) to log the
syslog messages to different files in
the syslog server. See your syslog
program's documentation for details.
Displays the system's current time.
Sets the system's time.
Displays the system's current date.
Sets the system's date.
Displays the system's time server.
Sets the system to not use a time
server.
Sets the time service protocol,
time server's IP address and the
device's time zone.
enable
disable
server