ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 152

MSAP2000 AAMS User's Guide
Commands (continued)
Table 58
COMMAND
show
arp
set
gateway
route
ping
showall
statisti cs
monitor
adsl
show
flush
<ip>[/
netmask]
<gateway ip>
show
set <dst ip>[/
netmask]
<gateway ip>
[metric] <name>
default
<gateway ip>
<metric>
delete <dst ip>[/
netmask]
flush
<ip> [count]
[nopause]
show [portlist]
linedata <portlist>
lineinfo <portlist>
lineperf <portlist>
linerate <portlist>
15mperf <portlist>
[count <0..96>]
1dayperf <portlist>
152
DESCRIPTION
Displays the management IP
address settings.
Displays the device's IP Address
Resolution Protocol status.
Clears the device's IP Address
Resolution Protocol status.
Sets the management IP address
and subnet mask.
Sets the IP address of the
device's default gateway.
Displays the routing table.
Adds a routing table entry.
Sets AAMS's default route.
Removes a routing table entry.
Clears the routing table.
Pings a remote host.
Displays all of the AAMS's IP
configuration.
Displays hardware monitor statistics.
Displays ADSL port connection
statistics.
Displays the line data load per symbol
(tone).
Displays the statistics of the specified
ADSL ports.
Displays the line quality of
the specified ADSL port.
Displays the line rate.
Displays line performance statistics
for the current and previous 15-
minute periods.
Displays line performance statistics for
the current and previous 24 hours.