Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
The following example displays the default alarm profile (DEFVAL).
Figure 100
ras> adsl alarmprofile show DEFVAL
01. DEFVAL
Thresh15MinLofs
Thresh15MinLos
Thresh15MinLols
Thresh15MinESs
ThreshFastRateUp
ThreshInterleaveRateUp
ThreshFastRateDown
ThreshInterleaveRateDown
InitFailureTrap(1-enable, 2-disable):
Thresh15MinFailedFastRetrain:
Thresh15MinSes (sec):
Thresh15MinUas
26.3.15 Alarm Profile Set Command
Syntax:
adsl alarmprofile set <profile> [<atuc lofs> <atur lofs> <atuc loss> <atur loss> <atuc lols> <atuc
lprs> <atur lprs> <atuc ess> <atur ess> <atuc fast rateup> <atur fast rateup> <atuc interleave
rateup> <atur interleave rateup> <atuc fast ratedown> <atur fast ratedown> <atuc interleave
ratedown> <atur interleave ratedown> <init fail enable> <atuc ses> <atur ses> <atuc uas> <atur
uas>]
where
<profile>
atuc
traffic)
atur
<atuc lofs>
<atur lofs>
<atuc loss>
<atur loss>
<atuc lols>
<atuc lprs>
<atur lprs>
Alarm Profile Show Command Example
= A name for the alarm profile (up to 31 ASCII characters).
Upstream. These parameters are for the connection (or
coming from the subscriber's device to the MSAP2000
AAMS.
Downstream. These parameters are for the
connection (or traffic) going from the MSAP2000
AAMS to the subscriber's device.
=
The number of Loss Of Frame Seconds that are
permitted to occur within 15 minutes.
= The number of Loss Of Signal Seconds that are permitted
to occur within 15 minutes.
=
The number of Loss Of Link Seconds that are permitted to
occur within 15 minutes
=
The Number of times a Loss of PoweR is permitted to occur
(on the ATUR) within 15 minutes.
ATU-C
----------
(sec):
0
(sec):
0
(sec):
0
(sec):
0
(bps):
0
(bps):
0
(bps):
0
(bps):
0
2
0
0
(sec):
0
182
ATU-R
- ---------
0
0
---
0
0
0
0
0
---
---
0
0
Advertisement
Table of Contents
