MSAP2000 AAMS User's Guide
This chapter describes the commonly used commands that belong to the sys (system) group of
commands.
25.1 Sys Commands Summary
The following table lists the
AAMS.
Sys Commands
Table 59
COMMAND
sys
info
passwd
reboot
snmp
server
C
commands you can use with the MSAP2000
sys
show
hostname
<hostname>
location
<location>
contact
<contact>
[show|sec|can cel]
show
getcommunity
<community>
setcommunity
<community>
trapcommunity
<community>
trustedhost
<ip>
trapdst
<ip> [<port>]
show
154
H A P T E R
Sys Commands
DESCRIPTION
Displays general system information.
Sets the system name.
Sets location information.
Sets contact person information.
Sets the system's
administrator password.
Sets the reboot timer or displays the
timer and remaining time for reboot.
If a reboot has been scheduled, use
cancel
Displays SNMP settings.
Sets the SNMP GetRequest
community.
Sets the SNMP SetRequest
community.
Sets the SNMP Trap community.
Sets the SNMP trusted host. Set
0.0.0.0 to trust all hosts.
Sets the SNMP trap server and
listening port. Set 0.0.0.0 to not
send any SNMP traps.
Displays the device's service status
and port numbers.
2 5
to prevent a reboot.