Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
Figure 41
The following table describes the labels in this screen.
Table 28
LABEL
VLAN Status
Static VLAN Setting Click Static VLAN Setting to configure ports to dynamically join a VLAN group or
Port
PVID
Priority
GVRP
Acceptable Frame
Type
Apply
VLAN Port Setting
VLAN Port Setting
DESCRIPTION
Click VLAN Status to see which ports are members of which VLANs.
permanently assign ports to a VLAN group or prohibit ports from joining a VLAN
group
The port numbers identify the MSAP2000 AAMS's ports.
Type the Port VLAN ID (PVID) from 1 to 4094. The MSAP2000 AAMS
assigns the PVID to untagged frames or priority frames (0 VID) received on
this port.
Select an IEEE 802.1p priority to assign to untagged frames or priority frames (0
VID) received on this port. See
the priority levels.
GVRP (GARP VLAN Registration Protocol) is a registration protocol that
defines a way for switches to register necessary VLAN members on ports
across the network. The MSAP2000 AAMS propagates VLAN information to
other devices when this check box is selected.
Select All to have the port accept both tagged and untagged incoming frames.
Select Tag Only to have the port only accept incoming frames that have a
VLAN tag.
Select Untag Only to have the port only accept incoming frames that do not have a
b
VLAN tag.
Click Apply to save your changes to the MSAP2000 AAMS's volatile memory.
The MSAP2000 AAMS loses these changes if it is turned off or loses power, so
use the Config Save link on the navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Table 11 on page 78
a
90
for more information on
Advertisement
Table of Contents
