Saving Your Configuration - ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual

24.1.1 Saving Your Configuration

Use the following command to save your configuration when you are
done with a configuration session.
ras> config save
Note: Do not plug out your MSAP2000 AAMS while saving your configuration.
This command saves all system configurations to nonvolatile memory. You must
use this command to save any configuration changes that you make, otherwise
the MSAP2000 AAMS returns to its default settings when it is restarted. Save
your changes after each configuration session.
Nonvolatile memory refers to the MSAP2000 AAMS's storage that remains
even if the MSAP2000 AAMS's power is turned off. Run time (memory) is lost
when the MSAP2000 AAMS's power is being turned off.
140