Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
A block is a set of consecutive bits associated with the path; each bit belongs to
one and only one block. Consecutive bits may not be contiguous in time.
Table 64
LABEL
nfebe
ncrc
Errors.
nfecc
Checks.
nfec
n-es
n-ses
n-uas
n-lpr
29.4.5 ADSL 15 Minute Performance Command
Syntax:
statistics adsl 15mperf <portlist> [count <0..96>]
where
<portlist>
[count <0..96>]
This command displays line performance statistics for the current and
previous 15-minute periods.
An example is shown next.
Line Performance Counters
DESCRIPTION
The Number of Far End Block
Near
end
Cyclic
The Far End Corrected blocks.
The Near End Corrected blocks.
The Number of Blocks transmitted.
The number of link ups and link downs.
The Number of Errored Seconds. This is how many seconds contained at
least one errored block or at least one defect.
The Number of Severely Errored Seconds. This is how many seconds contained
30% or more errored blocks or at least one defect. This is a subset of n-es.
The Number of Unavailable Seconds.
The Number of times a Loss of PoweR (on the ATUR) has occurred.
=
You can specify a single ADSL port <1>, all ADSL ports
<*> or a list of ADSL ports <1,3,5>. You can also
include a range of ports <1,5,6~10>.
=
Specify for which 15-minute interval (0~96) you
want to display performance statistics. 0 is the
current 15 minutes.
Redundancy
nblks
init
231
Advertisement
Table of Contents
