ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 77

MSAP2000 AAMS User's Guide
The DEFVAL IGMP filter profile is assigned to all of the ADSL ports by default. It
allows a port to join all multicast IP addresses (224.0.0.0~239.255.255.255). If
you want to allow an ADSL subscriber access to only specific IGMP multicast
groups, use the IGMP Filter Profile screen to configure a different profile and
then assign it to the subscriber's ADSL port in the XDSL Port Setting screen
(see Figure 44 on page
The top of the screen displays the configured IGMP filter profiles. Use the bottom
part of the screen (with the Add and Cancel buttons) to add or edit alarm profiles.
Figure 35
The following table describes the fields in this screen.
Table 21
LABEL
Port Profile
VC Profile
Alarm Profile
87).
IGMP Filter Profile
IGMP Filter Profile
DESCRIPTION
Click Port Profile to configure port profiles and assign them to individual ports.
Click VC Profile to open the VC Profile screen where you can configure virtual
channel profiles.
Click Alarm Profile to open the Alarm Profile screen where you can
configure limits that trigger an alarm when exceeded.
77