MSAP2000 AAMS User's Guide
Switch Commands (continued)
Table 61
COMMAND
rstp
dhcprelay
vlan
leaveall
<leaveall msec>
show
enable
disable
priority
<priority>
hellotime
<hellotime sec>
maxage
<maxage sec>
fwdelay
<fwdelay sec>
port
show
enable
<enet1|enet2|*>
disable
<portlist>
priority
<portlist>
<priority>
pathcost
<portlist>
<pathcost>
show
enable
settings.
disable
server
<server ip>
option82
enable
disable
set <relay info>
show
<vlanlist>
portshow
[portlist]
191
DESCRIPTION
Sets the GARP timer's Leave All
Timer.
Rapid STP commands (refer to IEEE
802.1w).
Displays the RSTP settings.
Turns on RSTP.
Turns off RSTP.
Sets the system's priority.
Sets the hello timer.
Sets the max age timer.
Sets the forward delay time.
Displays the Ethernet ports' RSTP
settings.
Enables RSTP on a port.
Disables RSTP on a port.
Sets the specified port's priority.
Sets the specified port's path cost.
Displays DHCP relay
Turns on DHCP relay.
Turns off DHCP relay.
Sets a DHCP relay server IP
address entry.
Turns on the DHCP relay agent inf
ormation (Option 82) feature.
Turns off the DHCP relay agent
information (Option 82) feature.
Adds the specified information for
the relay agent.
See
Section 28.8 on page 228
how to configure Virtual LAN.
Displays VLAN settings.
Displays the port(s) VLAN settings.
for