Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
Figure 24
The following table describes the labels in this screen.
Table 10
LABEL
Host Name
Location
Contact Person's
Model
Use Time Server
When Bootup
Time Server IP
Address
Current Time
General Setup
General Setup
DESCRIPTION
Choose a descriptive name for identification purposes. This name consists of up to
31 ASCII characters; spaces are allowed.
Enter the geographic location of MSAP2000 AAMS. You can use up to 31 ASCII
characters; spaces are not allowed.
Enter the name of the person in charge of MSAP2000 AAMS up to 31 ASCII
Name characters; spaces are not allowed.
This field displays your device type.
Enter the time service protocol that a timeserver uses. Not all timeservers
support all protocols, so you may have to use trial and error to find a protocol
that works. The main differences between them are the time format.
When you select the Daytime (RFC 867) format, the switch displays the day,
month, year and time with no time zone adjustment. When you use this format
it is recommended that you use a Daytime timeserver within your geographical
time zone.
Time (RFC-868) format displays a 4-byte integer giving the total number
of seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
None is the default value. Enter the time manually. Each time you turn on the
MSAP2000 AAMS, the time and date will be reset to 2000-1-1 0:0.
Enter the IP address (or URL if you configure a domain name server in the IP
Setup screen) of your timeserver. The searches for the timeserver for up to
60 seconds. If you select a timeserver that is unreachable, then this screen
will appear locked for 60 seconds. Please wait.
This field displays the time you open this menu (or refresh the menu).
51
Advertisement
Table of Contents
