Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
Table 48
LABEL
Apply
Cancel
18.3.7 Secured Client Configuration
Click Advanced Application and Access Control from the navigation panel and
then Secured Client from the Access Control screen to open the following
screen. Use this screen to configure IP address ranges of trusted computers that
may manage the MSAP2000 AAMS.
Figure 60
The following table describes the labels in this screen.
Table 49
LABEL
Return
Index
Enable
Start IP Address
End IP Address
Telnet/FTP/Web/
ICMP
Apply
Cancel
Access Control: Service Access Control (continued) (continued)
DESCRIPTION
Click Apply to save your changes to the MSAP2000 AAMS's volatile memory.
The MSAP2000 AAMS loses these changes if it is turned off or loses power, so
use the Config Save link on the navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Access Control: Secured Client Setup
Access Control: Secured Client Setup
DESCRIPTION
Click Return to go back to the previous screen.
This is the client set index number. A "client set" is a group of one or more "trusted
computers" from which an administrator may use a service to manage the AAMS.
Select this check box to activate this secured client set. Clear the check box if
you wish to temporarily disable the set without deleting it.
Configure the IP address range of trusted computers from which you can
manage the AAM.
The AAM checks if the client IP address of a computer requesting a service or
protocol matches the range set here. The AAM immediately disconnects the
session if it does not match.
Select services that may be used for managing the AAM from the specified
trusted computers.
Click Apply to save your changes to the MSAP2000 AAMS's volatile memory.
The MSAP2000 AAMS loses these changes if it is turned off or loses power, so
use the Config Save link on the navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
122
Advertisement
Table of Contents
