ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 170

MSAP2000 AAMS User's Guide
ADSL Commands (continued)
Table 60
COMMAND
alarmprofi le
annexl
setld <port number>
getld <port number>
show [profile]
set <profile>
[<atuc lofs>
<atur lofs>
<atuc loss>
<atur loss>
<atuc lols>
<atuc lprs>
<atur lprs>
<atuc ess>
<atur ess>
<atuc fast rateup>
<atur fast rateup>
<atuc interleave
rateup> <atur
interleave rateup>
<atuc fast ratedown>
<atur fast ratedown>
<atuc interleave
ratedown> <atur
interleave ratedown>
<init fail enable>
<atuc ses>
<atur ses>
<atuc uas>
<atur uas>]
delete <profile>
map <portlist>
<profile>
showmap [port number]
showport [port]
enable <portlist>
170
DESCRIPTION
Sets the specified port to line
diagnostic mode.
Displays the specified port line
diagnostics.
See Section 27.3.13 on page 208
how to configure alarm profiles.
Displays alarm profiles and their
settings.
Configures an alarm profile.
Removes an alarm profile.
Maps specified ADSL ports to an
alarm profile.
Displays alarm profile to ADSL
port mapping.
Displays which alarm profile
parameters are mapped to an
ADSL port.
Turns on the Annex L feature on the
specified port(s).
for