Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
This chapter tells how to access and navigate the web configurator.
3.1 Web Configurator Overview
The web configurator allows you to use a web browser to manage the MSAP2000
AAMS.
3.2 Accessing the Web Configurator
The web configurator is an HTML-based management interface that allows easy
MSAP2000 AAMS setup and management via Internet browser. Use Internet
Explorer 6.0 and later versions. The recommended screen resolution is 1024 by
768 pixels.
In order to use the web configurator you need to allow:
•
Web browser pop-up windows from your device. Web pop-up blocking is
enabled by default in Windows XP SP (Service Pack) 2.
•
JavaScripts (enabled by default).
•
Java permissions (enabled by default).
3.2.1 Password
1 Launch your web browser and enter the IP address of the MSAP2000
AAMS ("192.168.1.1" is the factory default) in the Location or Address
field. Press Enter.
2 The Password screen appears. Type "admin" in the user name field
and your password (factory default "1234") in the password field. Click
OK.
C
H A P T E R
Web Configurator
Introduction
29
3
Advertisement
Table of Contents
