MSAP2000 AAMS User's Guide
This command sets the packet type filter for the specified ADSL port(s).
The following example sets ADSL port 9 to reject ARP, PPPoE and IGMP packets.
Figure 136
ras> switch pktfilter set 9 arp pppoe igmp
Reject EAPol packets. EAP (Extensible
[eapol]
Authentication Protocol, RFC 2486) over LAN. EAP is
used with IEEE 802.1x to allow additional authentication
methods (besides RADIUS) to be deployed with no
changes to the access point or the wireless clients.
Reject IGMP packets. Internet Group Multicast
[igmp]
Protocol is used when sending packets to a specific group
of hosts.
Accept all
[none]
packets.
Packet Filter Set Command Example
217