Table 4 Screens Summary - ZyXEL Communications ZYWALL P1 User Manual

Table 3 Device Mode Features Comparison
FEATURE
IDP
Anti-Virus
VPN
Certificates
Authentication Server
NAT
NAT Address Mapping
Static Route
Remote Management
UPnP
ALG
Logs
Maintenance
Table Key: An O in a mode's column shows that the device mode has the specified feature.
The information in this table was correct at the time of writing, although it may be subject to
change.
The following table describes the sub-menus.

Table 4 Screens Summary

LINK
HOME
REGISTRATION
NETWORK
LAN
BRIDGE
WAN
SECURITY
ZyWALL P1 User's Guide
ROUTER MODE
O
O
O
O
O
O
O
O
O
O
O
O
O
TAB FUNCTION
This screen shows the ZyWALL's general device and network
status information. Use this screen to access the wizards,
statistics and DHCP table.
Registration Use this screen to register your ZyWALL and activate the trial
service subscriptions.
Service Use this to manage and update the service status and license
information.
LAN Use this screen to configure LAN DHCP and TCP/IP settings.
Static DHCP Use this screen to assign fixed IP addresses on the LAN.
IP Alias Use this screen to partition your LAN interface into subnets.
MAC Filter Use this screen to specify the MAC addresses of computers that
can access the ZyWALL.
Bridge Use this screen to change the bridge settings on the ZyWALL.
Route This screen allows you to configure route priority.
WAN Use this screen to configure the WAN port for internet access.
DDNS Use this screen to set up dynamic DNS.
Chapter 2 Introducing the Web Configurator
ZERO
CONFIGURATION BRIDGE MODE
MODE
O O
O O
O O
O O
O O
O
O
O O
O
O O
O O
O O
47