Chapter 3 0 Config Commands; Config Commands Summary; Config Show Command Example - ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual

MSAP2000 AAMS User's Guide
This chapter describes the

30.1 Config Commands Summary

The following table lists the
MSAP2000 AAMS.
Config Commands
Table 66
COMMAND
config
show
save
restore

30.2 Config show Command Example

Syntax:
ras> config show <sys|sw|adsl|ip|stat|all> [nopause]
This command shows the configuration of the specified category. nopause allows
you to show all settings at one time so you do not need to press a key to continue.
An example is shown next.
Config Commands
commands.
config
commands you can use with the
config
<sys|sw|adsl
|ip|stat|all
> [nopause]
235
C
H A P T E R
DESCRIPTION
Displays the device's configuration.
Saves the current configuration.
Reloads the factory default
configuration.
3 0