Zyxel Private Mib Snmp Traps; Configuring Snmp - ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual

MSAP2000 AAMS User's Guide

18.3.3 ZyXEL Private MIB SNMP Traps

The MSAP2000 AAMS can also send the following SNMP traps that are defined in
the ZyXEL private
MIBs.
Table 45
TRAP
sendThermoFailureTrap
sendVoltageOutOfRange This trap is sent periodically when the MSAP2000 AAMS's voltage is
sendVoltageNormalTrap
sendOverHeatTrap
sendOverHeatOverTrap
sendRebootTrap

18.3.4 Configuring SNMP

Click Advanced Application and Access Control from the navigation panel and
then SNMP from the Access Control screen to open the following screen.
Figure 57
ZyXEL Private MIB SNMP Traps
DESCRIPTION
This trap is sent when the hardware monitor chip has failed.
outside of the Trap accepted operating range.
This trap is sent when the MSAP2000 AAMS is no longer
outside of the accepted operating range.
This trap is sent periodically when the MSAP2000 AAMS is overheated.
This trap is sent when the MSAP2000 AAMS is no longer overheated.
This trap is sent each time the MSAP2000 AAMS restarts.
Access Control: SNMP
119