MSAP2000 AAMS User's Guide
Commands (continued)
Table 58
COMMAND
dhcprelay
vlan
show
enable
<priority>
hellotime
<hellotime sec>
maxage
<maxage sec>
fwdelay
<fwdelay sec>
port
show
enable
<enet1|enet2|*>
disable
<portlist>
priority
<portlist>
<priority>
pathcost
<portlist>
<pathcost>
show
enable
settings.
disable
server
<server ip>
option82
enable
disable
set <relay info>
show
<vlanlist>
portshow
[portlist]
set
<vid><portlist>
:<F<T|U>|X|N>
[<portlist>:
<F<T|U>|X|N>
...] [name]
enable
<vid>
148
DESCRIPTION
Displays the RSTP settings.
disable
Turns on RSTP.
priority
Turns off RSTP.
Sets the system's priority.
Sets the hello timer.
Sets the max age timer.
Sets the forward delay time.
Displays the Ethernet ports' RSTP
settings.
Enables RSTP on a port.
Disables RSTP on a port.
Sets the specified port's priority.
Sets the specified port's path cost.
Displays DHCP relay
Turns on DHCP relay.
Turns off DHCP relay.
Sets a DHCP relay server IP
address entry.
Turns on the DHCP relay agent
information (Option 82) feature.
Turns off the DHCP relay agent
information (Option 82) feature.
Adds the specified information for the
relay agent.
See
Section 28.8 on page 228
how to configure Virtual LAN.
Displays VLAN settings.
Displays the port(s) VLAN settings.
Configures a VLAN entry.
Turns on a VLAN entry.
for