ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 193

MSAP2000 AAMS User's Guide
Switch Commands (continued)
Table 61
COMMAND
pktfilter
dot1x
disable
<portlist>
set <port>
<mac> [<mac>
<mac> ...]
delete <port>
<mac> [<mac>
<mac> ...
show [portlist]
set <portlist>
[pppoe|ip|arp|n
etbios|dhcp|eap
ol|igmp|none]
pppoeonly <portlist>
show [portlist]
enable
disable
auth <profile|radius
>
port
enable
<portlist>
disable
<portlist>
control
<portlist>
<auto|auth|unau th>
reauth
<portlist>
<on|off>
period
<portlist>
<period>
193
DESCRIPTION
Turns off the MAC filter for a port(s).
Adds a MAC filter MAC entry.
Removes a MAC filter MAC entry.
See Section 28.13 on page 242
how to configure packet filters.
Displays packet type filter settings.
Sets the packet type filter for a specific
port.
none
accepts all packets. This
pktfilter
command disables the
pppoeonly <portlist>
command.
Uses this command to allow only
PPPoE traffic. It drops any non-
PPPoE packets.
This command disables the
pktfilter set <portlist>
[pppoe|ip|arp|netbios|dhc
p|eapol|igmp|none]
command.
Displays IEEE 802.1X settings.
Turns on IEEE 802.1X.
Turns off IEEE 802.1X.
Sets IEEE 802.1X to use the local
profiles or an external RADIUS
server for authentication.
Turns on IEEE 802.1X for
specific ports.
Turns off IEEE 802.1X for
specific ports.
Sets the IEEE 802.1X port
authentication option for specific
ports.
Sets the IEEE 802.1X re-
authentication option for specific
ports.
Sets the IEEE 802.1X re-
authentication period for specific
ports.
for