Table of Contents
Advertisement
MSAP2000 AAMS User's Guide
Figure 18
16 Click Save.
Figure 19
You can now use the device (with the other settings set to the defaults) to provide
service to ADSL subscribers. See the rest of this chapter for information on other
default settings.
4.3 Default Settings
This table lists major default settings.
Table 5
VLAN Default Settings
One VLAN is created (this is also the management VLAN).
VID:
Registration
Tagging:
STP Default Settings
Enable/Disable State:
Operational Mode:
(ADSL) Port Profile Default Settings
Name:
DEFVAL Profile Status:
Latency Mode:
Max Rate
Min Rate
Interleave Delay
Max SNR
Config Save Menu
Config Save Screen
Default Settings
1
Fixed for the Ethernet and ADSL ports
Untagged for all ports
Disabled
auto
Active
Interleave
Upstream ADSL Settings:
512 Kbps
64 Kbps
4 ms
31 db
Downstream ADSL Settings:
2048 Kbps
64 Kbps
4 ms
31 db
39
Advertisement
Table of Contents
