ZyXEL Communications Multi-service Access Platform MSAP2000 User Manual page 192

MSAP2000 AAMS User's Guide
Switch Commands (continued)
Table 61
COMMAND
mac
set <vid><portlist>
:<F<T|U>|X|N>
[<portlist>:
<F<T|U>|X|N>
...] [name]
enable <vid>
disable <vid>
delete <vlanlist>
pvid <portlist>
<pvid>
priority <portlist>
<priority>
gvrp <portlist>
<enable|disable
>
frametype <portlist>
<all|tag|untag>
cpu show
set <vid>
flush
agingtime
show
set
<sec|0:disabled
>
count
show
[portlist]
enable
<portlist>
disable
<portlist>
set <portlist>
<count>
filter show [portlist]
enable
<portlist>
192
DESCRIPTION
Configures a VLAN entry.
Turns on a VLAN entry.
Turns off a VLAN entry.
Removes a VLAN entry.
Sets the PVID (Port VLAN ID)
assigned to untagged frames or
priority frames (0 VID) received on
this port(s).
Sets a port's default IEEE
802.1p priority.
Turns GVRP on or off for the
specified ports.
Sets the specified DSL port to
accept VLAN tagged or
untagged Ethernet frames (or
Displays the VLAN ID of the
management VLAN.
Sets the VLAN ID of the
management VLAN
.
Clears learned MAC addresses
from the forwarding table.
Displays the MAC aging out time
period.
Sets the MAC aging out time period.
Displays the system's current MAC
address count settings.
Turns on the MAC address count
filter for a port(s).
Turns off the MAC address count
filter for a port(s).
Sets the MAC address count filter
for a port(s).
Displays MAC filter settings.
Turns on the MAC filter for a port(s).