Ricoh SP 8400DN Field Service Manual page 1445

Default: [Off]
If [Fusing Unit Off Mode (Energy Saving) On/Off] is set to [On], you can specify when to exit Fusing Unit Off
mode and the time to elapse before entering Fusing Unit Off mode.
If [Exit Fusing Unit Off Mode] is set to [On Printing], the machine exits Fusing Unit Off mode when printing is
performed.
If [Exit Fusing Unit Off Mode] is set to [On Operating Control Panel], the machine exits Fusing Unit Off mode
when a key is pressed on the control panel of the machine.
If the timer is set to [On], you can set the time from 10 seconds to 240 minutes, using the number keys.
Energy Saving Recvry. for Business Applicatn.
User Tools (System settings > General Settings)
Specify whether or not to enable low-energy recovery from Sleep mode to use applications independent of the
machine, such as Address Book Management or Browser.
Default: [Off]
If [On (Energy Saving)] is selected, it takes longer than usual to be ready to use the machine.
Recovery Time/Reduced Electrical Consumption
Mainly Europe and Asia
Mainly North America
•
The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
Reduced electrical consumption in Sleep mode
0.89 W
0.79 W
7.Detailed Descriptions
Recovery time from Sleep mode
7 sec.
7 sec.
707