Ricoh SP 8400DN Field Service Manual page 1303

SC No. Type
SC682 PCU: ID Chip Communication Error
SC682- D Invalid Device ID
01
SC682- D Channel Error
06
SC682- D Device Error
11
SC682- D Communication Aborted (error during communication)
16
SC682- D Communication Timeout
21
SC682- D Device Stopped (logically stopped)
26
SC682- D Requested Buffer Full
31
Received an error notification during EEPROM communication and does not resume after
3 retries.
•
•
•
•
•
•
SC No. Type
SC682- D PCU: Verify Error
36
Received a error notification during EEPROM communication and does not resume after 2
retries.
•
•
•
•
•
•
SC No. Type
SC687-00 D
Error Name/Error Condition/Major Cause/Solution
Device ID date error
Mu sensor / EEPROM defective
Electrical noise
PCU is not set properly.
Turn the power off/on.
Replace the PCU.
Error Name/Error Condition/Major Cause/Solution
Device ID date error
Mu sensor / EEPROM defective
Electrical noise
PCU is not set properly.
Turn the power off/on.
Replace the PCU.
Error Name/Error Condition/Major Cause/Solution
PER Not Received Error
6.Troubleshooting
565