4.Replacement and Adjustment
2.
Remove the levers [A].
Use a screwdriver with a shaft diameter of 5 mm.
3.
Remove the fusing upper cover [A].
•
You must route the harnesses for the pressure roller temperature sensor and the fusing roller
temperature sensor correctly when reassembling the fusing unit. See the notes when reassembling
the fusing unit.
Fusing Lower Cover
1.
Remove the fusing unit. (Replacement)
2.
Remove the fusing upper cover.
3.
Remove the screws and the connectors.
358
(Notes When Reassembling the Fusing
(Fusing Upper
Cover)
Unit)